Continuous positive airway pressure support system with nasal or nasal congestion CPAP (Nasal-CPAP) will continue to positive air flow into the airway CPAP ventilator. Refers to the spontaneous breathing conditions, in the entire breathing cycle of artificial imposition of a certain degree of positive airway pressure, which is conducive to prevent airway collapse, increase the functional residual capacity , Improve lung compliance, and improve oxygenation.The ventilator only maintains a certain positive airway pressure, without mechanical ventilation.
Bubble CPAP System – Restohealth mLabs – 01
BRAND – mLabs
- Able to give the baby a safe and controllable oxygen concentration.
- It is possible to effectively maintain the functional residual capacity.
- Can help reduce the breathing done by the baby.
- Can reduce the need for invasive mechanical ventilation.
- Able to give the baby a better wet gas.
- Can significantly reduce the incidence of chronic pneumonia (CLD).
- Can improve some of the lung physiological indicators, such as height, weight and so on.
Related Products
Infant Radiant Warmer – mLabs – IRW 1723
BRAND – mLabs
Advance micro processor controlled system with self check on the electronic circuitry skin / Air Manual control. Digital display of baby temperature.
Oxygen Concentrator 5 Ltr.
* Flow Rate 0.5-5L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Digital Vacuum Oven
- Capacity – 24 Ltr.
- Temperature Range ºC – Ambient + 10- 250ºC
- Temperature Resolution ºC – 0.1ºC
- Temperature Uniformity – + 1%
- Inner Dimension (cm) WxDxH – 30x30x27
- Outer Dimension (cm) WxDxH – 48x48x60
- Power Wattage – 800 W
- Vacuum degree – 220V / 50Hz
- Gross Weight – 55 kg
Oxygen Concentrator 10 Ltr.
* Flow Rate 0.10- 10L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Ophthalmic Operation Table
- Maximum Height – 800 mm
- Minimum Height – 600 mm
- Vertical Adjustment Range – 200 mm
- Total Length – 1880 mm
- Total Width – 690 mm
- Base Size – 920 mm x 535 mm
- Trendelenberg (head-low) – 6 Degrees
- Reverse tredelenberg – 5 Degrees
- Current – 230 v A/C -50 Hz
- Power Consumption – 340 VA
- Weight Capacity – 125 Kgs.
- Gross Weight – 160 Kgs.
Medical Air Compressor – mLabs – 1000
BRAND – mLabs
Air Compressor for Ventilator & Bubble CPAP
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Open Care System – mLabs – DX
BRAND – mLabs
Range of mLabs – DX open care systems allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self check on the electronic circuitry skin / air / manual control.
6 Mobile OT Light
TECHNICAL SPECIFICATION :
- Number of LED: 84
- Intensity: 180,000 Lux
- Diameter of Light: 650mm
- Color Temperature: 3800-5200K
- Spot Diameter: 100 -150 mm
- Color Rendering Index: 91 RA
- LED color: white & yellow
- Focusing: Adjustable
- LED Average Life: More than 50000 Hrs
- Intensity Control: 10-100 Digital
- Power Supply: 220V / 50Hz AC
- Power: 150 Watt
- Special Function: 5 Memory Function with remote control & brightness control
Bubble CPAP Machine – Restohealth mLabs – 03
BRAND – mLabs
Newborn / Pediatric CPAP Continuous Positive Airway Pressure Ventilation Support System.
Additional Feature
- With inbuilt Air-oxygen blender.
- Compact, easy to carry with built in handle on the top.
- Can be used as transport CPAP, if attached to power-supply and oxygen.
- New concept free built-in air compressor easy BUBBLE CPAP.
- Low power design for spontaneous breathing of newborns and children, to provide continuous positive pressure ventilation support.
- Small size, low noise, maintenance-free for N ICU, transport, pediatric ward and other different place.
Bubble CPAP Machine – Restohealth mLabs – 02
BRAND – mLabs
Newborn / Pediatric CPAP Continuous Positive Airway Pressure Ventilation Support System.
Additional Feature
- With inbuilt Air-oxygen blender.
- Compact, easy to carry with built in handle on the top.
- Can be used as transport CPAP, if attached to power-supply and oxygen.
- New concept free built-in air compressor easy BUBBLE CPAP.
- Low power design for spontaneous breathing of newborns and children, to provide continuous positive pressure ventilation support.
- Small size, low noise, maintenance-free for N ICU, transport, pediatric ward and other different place.
Medical Air Compressor – mLabs – 3000
BRAND – mLabs
Air Compressor with Digital Display
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Respiratory Humidifier
BRAND – mLabs
It can match with imported and domestic ventilator, CPAP for heating and humidifying.