Pan has provision for holding 2 water bottles and supplied with 2 number of P.P. 500ml P.P. bottles with S.S. nozzle.
Each pan has holes of 20mm diameters on all sides
All the joints will be argon arc welded with smooth and glossy finish. Overall inner size: 920mm x 600mm x 230mm (LXWXH)
mLabs Pig Pans and Trolley
BRAND – mLabs
Made of AISI non magnetic alkaline and chemical resistant 304 quality stainless steel material.
Pans are made of S.S 304 grade heavy duty 16 SWG sheet.
Pans are provided with 2 handles made from 4-5mm solid S.S. wire on each side for easy lifting
Related Products
Ophthalmic Operation Table
- Maximum Height – 800 mm
- Minimum Height – 600 mm
- Vertical Adjustment Range – 200 mm
- Total Length – 1880 mm
- Total Width – 690 mm
- Base Size – 920 mm x 535 mm
- Trendelenberg (head-low) – 6 Degrees
- Reverse tredelenberg – 5 Degrees
- Current – 230 v A/C -50 Hz
- Power Consumption – 340 VA
- Weight Capacity – 125 Kgs.
- Gross Weight – 160 Kgs.
Oxygen Concentrator 10 Ltr.
* Flow Rate 0.10- 10L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Bubble CPAP Machine – Restohealth mLabs – 02
BRAND – mLabs
Newborn / Pediatric CPAP Continuous Positive Airway Pressure Ventilation Support System.
Additional Feature
- With inbuilt Air-oxygen blender.
- Compact, easy to carry with built in handle on the top.
- Can be used as transport CPAP, if attached to power-supply and oxygen.
- New concept free built-in air compressor easy BUBBLE CPAP.
- Low power design for spontaneous breathing of newborns and children, to provide continuous positive pressure ventilation support.
- Small size, low noise, maintenance-free for N ICU, transport, pediatric ward and other different place.
Double Dome Ceiling OT Light
Technical Data
- Number of LED : 105 X2
- Intensity : 2,00,000 x 2 Lux
- Diameter of Light : 10-100 Digital
- Spot Diameter : 100- 150 mm
- Depth Lumination – 10-15cm
- Colour Temp. : 3800-5200K
- Colour Rendering Index : 91 Ra
- Focusing : Fix
- LED Average Life : >50000 Hrs.
- Intensity Control : 560mm X 2
- Power Supply : 220V/50Hz AC
- Power : 120 Watt X 2
- Special Function : 5 Memory Function
Colour Specification – Multi Colour
Positioning – Ceiling Mounted,Modular,Mobile,Wall Mounted
Infant Radiant Warmer – mLabs – NWDX
BRAND – mLabs
Advance micro processor controlled system with self check on the electronic circuitry Skin / Manual control. Digital Display of Baby Temperature / Set Temperature. Manual / Servo two function control modes provide the clinician more flexibility while optimizing the thermal environment. The Spacious baby bed incorporated easily drop down sides for maximum access to the baby. The Control Panel is also the heart for a completely integrated alarm system with both audible and visual Indicators in the event.
Baby Incubator mLabs – 1723D
BRAND – mLabs
- The temp. controlled unit is operated by advanced micro computer technology.
- The three digital display indication provide the Set Temperature, Air Temperature and Skin Temperature.
- Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
- In addition the skin temperature is display is larger than the set / air temperature display.
- The removable heater and control unit make it easy to clean and service.
- Full visibility & accessibility of the baby is provided by the designed of acrylic hood.
Oxygen Analyzer
BRAND – mLabs
It is a kind of device that can detect the oxygen concentration continuously. It adopts the imported solid oxygen electrode, with good reaction. It can match with the devices such as hood, incubator, CPAP, hyperbaric oxygen chamber, ventilator or anesthesia machine, oxygen makers.
Respiratory Humidifier
BRAND – mLabs
It can match with imported and domestic ventilator, CPAP for heating and humidifying.
mLabs Phototherapy Unit 24 LED Double Surface
BRAND – mLabs
In the new born period i.e. birth to one month, jaundice can pose a serious problem, because high level of the bilirubin, which is not water soluble, can be decomposed to a harmless metabolic which is water soluble, does not cross blood brain barrier and is rapidly excreted in the bile and urine and so does not accumulate .
Infant Radiant Warmer – mLabs – DX (E)
BRAND – mLabs
Range of mLabs– DX(E) Infant Radiant Warmer allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self-check on the electronic circuitry skin /air/ manual control.
Medical Air Compressor – mLabs – 2000
BRAND – mLabs
Air Compressor for Ventilator & Bubble CPAP
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Digital BOD Incubator
- Capacity – 150 Ltr.
- Temperature Range – 0 – 65oC
- Temperature Uniformity – + 0.5oC
- Temperature Resolution -0.1oC
- Working temperature – 5oC to 30oC
- Timer – 1-9999 min
- Refrigerant – R134A
- Power Wattage – 500 W
- Inner dimension (cm) WxDxH – 50x40x75
- Outer dimension (cm) WxDxH – 64x62x127
- Load per rack – 2 / 15kg
- Power Supply – 220 V / 50 Hz
- Gross Weight -97 kg