This high-quality glass-body pH electrode can be used in non-aqueous solutions and solutions that contain organic solvents, strong acids, or strong bases. The electrode features a sealed, gel-filled Ag-AgCl combination reference electrode and uses a BNC connector. It is designed to be used with the Vernier Electrode Amplifier or Vernier Go Wireless Electrode Amplifier to make measurements in the pH range of 0 to 14. pH Electrode is a glass body, refillable, ceramic diaphgram pH electrode with a BNC connector and Low-Noise Coaxial Cable. This electrode has a spherical pH sensing bulb made with high temperature glass. This design is ideal for laboratory samples, beer and other liquid samples, as well as general purpose use. Operating Temperature is 0 to 70°C. Zero Point : 7 pH. Response Time : < 10 seconds for 95% response from 7 pH to pH 4.01. Glass Membrane Impedance : < 200 M at 25°C. Pressure : Upto 6 bar (87 psi) at 25°C. Reference Electrolyte : KCl. ph Range : 0 to 14.00 pH.
Ph Electrode Acrylic, Highly Sensitive, Unbreakable
* Measuring Range 0.0 ~ 14.0 pH
* Operating Temp. 0°C ~ 50°C
* Zero Electrical Potential 7 ±1 pH
* Filling: Gel
* Connector Type: BNC
Related Products
Digital Manometer
- Accuracy:+ 0.3% FSO (25 º C)
- Repeatability: +0.2% (Max+/-0.5%FSO)
- Max/min/average, and with a relative time.
- Zeroing,offset,and data compensation.
- Storage Conditions:14 º F to 140F(-1 to 60 º CC)
3 in 1 CO2 Meter Thermometer Hygrometer Digital Portable Gas Leak Detector
* Record mode: manual measurement, immediate measurement
* Carbon dioxide measurement scope: 0~9999PPM
* Humidity measurement scope: 0%RH~99.9%RH
* Resolution ratio: 0.1%RH
* Accuracy: ±3% (10~90%)
Wire Tracker Tracer Ethernet LAN Network Cable Tester
- Signal transfer distance: More than 1km Dimension: Transmitter: 118 x 62 x 30mm, Receiver:178 x 35 x 24mm
- Power: Transmitter: 1.5V AAA 3 Batteries(included), Receiver: 6F22 9V Battery(included) Display: LED
- Operating Temp.: -10-40? Operating Humidity.: -10-95%
- Wire Tracer Cable Tester Tracker Phone Line Network Finder Features: This item is designed for cable network system installation
Analytical Weighing Scale Capacity 200gm 0.1mg
Specifications:
* Max Capacity: 220 grams
* Resolution: 0.0001g (0.1mg)
* Repeatability: ± 0.0005g
* Calibration: Internal Automatic Calibration
* Output Interface: RS232
* Product size: 350 x 207 x 355 mm
* Pan Size: ⌀ 80 mm
* Power Supply: 220v
Digital Halogen Moisture Balance Analyzer
- 100g Capacity
- 1 mg (0.001g) Resolution
- 0.01% Moisture Readability
- 90mm Platform
- TFT Touchscreen Display
- Halogen Heating Element
- Data store & bar code numbering
- One touch printing facility (optional printer separate)
Portable Digital CO2 Meter CO2 Monitor Detector Gas Analyzer 9999ppm CO2 Analyzers Temperature Relative Humidity Test
* Temperature Range: -10.0~70.0°(14~158°)
* Accuracy: ±0.6°/ ±0.9°(0~50°/ 32~122°), others ±1.2°
* Humidity Range: 0.1~99.9%
* Storage Condition: -20~60°, 0~99%RH
* Accuracy: ±3%(10~90%)
Microprocessor Spectrophotometer (VIS) Single Beam
- Range 320-1020 nm with facility for automatic concentration
- 3 1/2 Bright Led display for data.
- A Set of 4 Cuvettes of 10 mm path length is provided
- Including Software.
- % Transmission and absorbance and K factor measurements.
4 in 1 Gas Detector Analyzer Portable O2 CO H2S LEL GasTester
- O2 measuring range: 0 ~ 30%, resolution: 0.1%
- LEL measuring range: 0 ~ 100%, resolution: 1%
- H2S measuring range: 0 ~ 500 PPM, resolution: 1 PPM
- CO measuring range: 0 ~ 9999 PPM, resolution: 1 PPM
- Working humidity: 15% ~ 90% RH (no condensation) / Working temperature: – 10 ~ 50 ℃
EC-TDS-PH Temp Combo Meter
* Range: pH: 0.00 ~ 14.00 pH
* Temperature: 0℃ ~ 60℃ (32.0℉ ~ 140.0℉)
* EC: 1 ~ 19999 us/cm
* TDS: 10 ~ 19999 ppm
* Resolution: pH: 0.01 pH
* Temperature:0.1℃(0.2℉)
* EC: 1us/cm
* TDS: 1ppm
* Accuracy: pH: ±0.05pH
* Temperature: ±0.5℃(±1℉)
* Automatic Temperature Compensation: 0℃ ~ 60℃
* EC, TDS: ±2%
* Material: Plastic ABS
Double Beam Microprocessor UV/VIS Spectrophotometer
- Automatic Wave Length Calibration & Wavelength Scan
- Spectrum and Data can be printed out by printer and sent to computer via USB PORT
- SOFTWARE INCLUDED (IMPORTED)
- Fully Automatic Operations
- large Screen with Graphical display
Digital Viscometer (BRTA, REDWOOD)
Accessories
1. Accessories for standard TAR viscometer ø 2 mm
ML083-01: Go/no go gauge for ø 2 mm orifice
ML083-02: Cup with orifice ø 2 mm
ML083-03: Ball valve ø 2 mm2.
2. Accessories for standard TAR viscometer ø 4 mm
ML083-01: Go/no go gauge for ø 4 mm orifice
ML083-02: Cup with orifice ø 4 mm
ML083-03: Ball valve ø 4 mm3.
Accessories for standard TAR viscometer ø 10 mm
ML083-01: Go/no go gauge for ø 10 mm orifice
ML083-02: Cup with orifice ø 10 mm
ML083-03: Ball valve ø 10 mm
Spare Parts
1. Graduated cylinder 100 ml
A. Graduated cylinder, glass, 100 ml capacity
2. Thermometer IP 8C
B. Thermometer IP 8C, range 0 – 45 °C, subd. 0.2 °C
Handheld Refractometer Sugar Brix 0-32% with ATC
Brix 0-32% Handheld Refractometer Sugar Brix Auto Refractometer with ATC
Description
The body of refractometer is designed with streamline shape. The internal is built with optical glass lens. The wide cover plate guarantees the perfect match with the lens. The body is of high quality for being made of copper plating. The horizon is clearer for the upgrading of lens.
1. The scale is clear with the imported lens.
2. The refractometer is delicate for being made of copper plating.
3. The measurement is more accurate with Automatic Temperature Compensation.
4. The body is mainly made of metal with silica gel cover.
Specifications
Material: Metal + Plastic
Colour: as shown in figure
Measuring range Sugar: 0-32%
Automatic temperature compensation (ATC): 10°C ~ 30°C (50°F to 86°F)
Operation
Step 1: Place a few drops of the liquid on the main prism.
Step 2:Cover the prism, look through the eyepiece against the light.
Step 3:Adjust the eyepiece to the clear state.
Step 4:You can read the result value on the scale.
Package Included
1 x Refractometer
1 x Pipette
1 x Instruction manual
1 x Mini Screw Driver