Vein Trace is a unique precision device to detect and trace the superficial veins on the human body for neonates/ children and adults thus reduce the stress on both the user and the patient. The unique wand shape gives great comfort to the user on all kinds of patients and could be used with ease to locate the smallest possible vein on the body superficially. It uses the RED LEDs with very good lumen efficacy with specific wavelength for better penetration into the skin and there by trace the veins, which are superficial on the body.
Vein Detector
BRAND – mLabs
- Number of RED LEDs : 6
- 8 volts rechargeable battery pack.
- Charger for charging the device operating voltage: Universal.
- Dimensions: 50 x 16 x 160 mm
- Weight: 120 grams
Related Products
Medical Air Compressor – mLabs – 2000
BRAND – mLabs
Air Compressor for Ventilator & Bubble CPAP
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Infant Radiant Warmer – mLabs – NWDX
BRAND – mLabs
Advance micro processor controlled system with self check on the electronic circuitry Skin / Manual control. Digital Display of Baby Temperature / Set Temperature. Manual / Servo two function control modes provide the clinician more flexibility while optimizing the thermal environment. The Spacious baby bed incorporated easily drop down sides for maximum access to the baby. The Control Panel is also the heart for a completely integrated alarm system with both audible and visual Indicators in the event.
Open Care System – mLabs – D2
BRAND – mLabs
Range of mLabs – D2 open care system that comes in fiber and powder coated MS, allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self-check on the electronic circuitry skin / air/ manual control. Latest technology packed with higher accuracy & enhanced visibility has been integrated in the system
Baby Incubator mLabs – 1723D
BRAND – mLabs
- The temp. controlled unit is operated by advanced micro computer technology.
- The three digital display indication provide the Set Temperature, Air Temperature and Skin Temperature.
- Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
- In addition the skin temperature is display is larger than the set / air temperature display.
- The removable heater and control unit make it easy to clean and service.
- Full visibility & accessibility of the baby is provided by the designed of acrylic hood.
Oxygen Concentrator 10 Ltr.
* Flow Rate 0.10- 10L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Transport Incubator -mLabs -TRP
BRAND – mLabs
The controller features a display that is easy to read at any angle during transport. Display for air and skin temperature help you maintain, control and provide essential information about the infant’s thermal support. Microprocessor controlled system with air and skin modes of operation. Display both temperatures i. e. Air/Skin temp along with Set temp. Soft touch operation with digital display and extensive alarms.
Bubble CPAP System – Restohealth mLabs – 01
BRAND – mLabs
- Able to give the baby a safe and controllable oxygen concentration.
- It is possible to effectively maintain the functional residual capacity.
- Can help reduce the breathing done by the baby.
- Can reduce the need for invasive mechanical ventilation.
- Able to give the baby a better wet gas.
- Can significantly reduce the incidence of chronic pneumonia (CLD).
- Can improve some of the lung physiological indicators, such as height, weight and so on.
Ophthalmic Operation Table
- Maximum Height – 800 mm
- Minimum Height – 600 mm
- Vertical Adjustment Range – 200 mm
- Total Length – 1880 mm
- Total Width – 690 mm
- Base Size – 920 mm x 535 mm
- Trendelenberg (head-low) – 6 Degrees
- Reverse tredelenberg – 5 Degrees
- Current – 230 v A/C -50 Hz
- Power Consumption – 340 VA
- Weight Capacity – 125 Kgs.
- Gross Weight – 160 Kgs.
Oxygen Concentrator 5 Ltr.
* Flow Rate 0.5-5L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Infant Radiant Warmer – mLabs – DX (E)
BRAND – mLabs
Range of mLabs– DX(E) Infant Radiant Warmer allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self-check on the electronic circuitry skin /air/ manual control.
Medical Air Compressor – mLabs – 3000
BRAND – mLabs
Air Compressor with Digital Display
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Digital Vacuum Oven
- Capacity – 24 Ltr.
- Temperature Range ºC – Ambient + 10- 250ºC
- Temperature Resolution ºC – 0.1ºC
- Temperature Uniformity – + 1%
- Inner Dimension (cm) WxDxH – 30x30x27
- Outer Dimension (cm) WxDxH – 48x48x60
- Power Wattage – 800 W
- Vacuum degree – 220V / 50Hz
- Gross Weight – 55 kg