- It is mainly used on delivery room, baby wards, N ICU that the baby’s maximum weight up to 10 KG.
- Adjust the Oxygen concentration from 21% to 100%
- The MAX-P and PIP are safe, controlled and accurate.
- The PEEP is constant and accurate.
- Simple operation and flexible application.
- The output pressure would not be influenced by the
operator experience, training, attention and fatigue.
Resuscitation Trolley
BRAND – mLabs
Baby Bassinet with a big shelf at the bottom for keeping consumables.
Related Products
mLabs Phototherapy Unit 15 LED Single Surface
BRAND – mLabs
In the new born period i.e. birth to one month, jaundice can pose a serious problem, because high level of the bilirubin, which is not water soluble, can be decomposed to a harmless metabolic which is water soluble, does not cross blood brain barrier and is rapidly excreted in the bile and urine and so does not accumulate.
Oxygen Concentrator 5 Ltr.
* Flow Rate 0.5-5L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Transport Incubator -mLabs -TRP
BRAND – mLabs
The controller features a display that is easy to read at any angle during transport. Display for air and skin temperature help you maintain, control and provide essential information about the infant’s thermal support. Microprocessor controlled system with air and skin modes of operation. Display both temperatures i. e. Air/Skin temp along with Set temp. Soft touch operation with digital display and extensive alarms.
mLabs Phototherapy Unit 15 LED Double Surface
BRAND – mLabs
In the new born period i.e. birth to one month, jaundice can pose a serious problem, because high level of the bilirubin, which is not water soluble, can be decomposed to a harmless metabolic which is water soluble, does not cross blood brain barrier and is rapidly excreted in the bile and urine and so does not accumulate.
6 Mobile OT Light
TECHNICAL SPECIFICATION :
- Number of LED: 84
- Intensity: 180,000 Lux
- Diameter of Light: 650mm
- Color Temperature: 3800-5200K
- Spot Diameter: 100 -150 mm
- Color Rendering Index: 91 RA
- LED color: white & yellow
- Focusing: Adjustable
- LED Average Life: More than 50000 Hrs
- Intensity Control: 10-100 Digital
- Power Supply: 220V / 50Hz AC
- Power: 150 Watt
- Special Function: 5 Memory Function with remote control & brightness control
Baby Incubator mLabs – 1723D
BRAND – mLabs
- The temp. controlled unit is operated by advanced micro computer technology.
- The three digital display indication provide the Set Temperature, Air Temperature and Skin Temperature.
- Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
- In addition the skin temperature is display is larger than the set / air temperature display.
- The removable heater and control unit make it easy to clean and service.
- Full visibility & accessibility of the baby is provided by the designed of acrylic hood.
Medical Air Compressor – mLabs – 2000
BRAND – mLabs
Air Compressor for Ventilator & Bubble CPAP
- Delivers dry, clean medical-grade compressed air
- Optional cost-performance ratio
- Quiet performance suitable for use in any ICU / N ICU
- It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and bubble CPAP units
Oxygen Analyzer
BRAND – mLabs
It is a kind of device that can detect the oxygen concentration continuously. It adopts the imported solid oxygen electrode, with good reaction. It can match with the devices such as hood, incubator, CPAP, hyperbaric oxygen chamber, ventilator or anesthesia machine, oxygen makers.
Infant Radiant Warmer – mLabs – S
BRAND – mLabs
The digital, micro processor – based controller comes with a full spectrum of features. Two function control modes provide the clinician more flexibility while optimizing the thermal environment. Dual digital temperature displays allow easy visualization of patient temperature and set point.
Infant Radiant Warmer – mLabs – NWDX
BRAND – mLabs
Advance micro processor controlled system with self check on the electronic circuitry Skin / Manual control. Digital Display of Baby Temperature / Set Temperature. Manual / Servo two function control modes provide the clinician more flexibility while optimizing the thermal environment. The Spacious baby bed incorporated easily drop down sides for maximum access to the baby. The Control Panel is also the heart for a completely integrated alarm system with both audible and visual Indicators in the event.
Oxygen Concentrator 10 Ltr.
* Flow Rate 0.10- 10L/min
* Outlet Pressure 6-10 PSI (0.04-0.07 Mpa)
* Net Weight 16Kgs
* Sound Level ≤40dB
* Power Consumption ≤350W
* Input Frequency 50Hz; 60Hz
* Put Voltage AC230V ± 10%; AC110V ±10%
* Alarm 1. Power failure alarm;
2. High and low pressure alarm;
3. Low oxygen purity alarm:
When oxygen purity is >82%, blue light illuminates;
When oxygen purity is < 82%, red light illuminates for indicating low purity;
4. Low flow alarm;
Optional
• Nebulizer (Atomizer)
• Low concentration alarm: when oxygen concentration is 82% or above, the green light will be on; when the oxygen concentration is blow 82%, the red light will be on.
• Maintenance alarm: alarm for maintenance after 3000 hours' operation.
• High temperature alarm: alarm for high temperature when the internal system temperature is above 50°C.
• Pulse oximeter: fingertip pulse oximeter is available for monitoring patient's oxygen saturation on site.
• Small LCD display: showing accumulated time, present working time and preset time.
Ophthalmic Operation Table
- Maximum Height – 800 mm
- Minimum Height – 600 mm
- Vertical Adjustment Range – 200 mm
- Total Length – 1880 mm
- Total Width – 690 mm
- Base Size – 920 mm x 535 mm
- Trendelenberg (head-low) – 6 Degrees
- Reverse tredelenberg – 5 Degrees
- Current – 230 v A/C -50 Hz
- Power Consumption – 340 VA
- Weight Capacity – 125 Kgs.
- Gross Weight – 160 Kgs.