- Compressor Design At 45degree ambient
- Automatic control system for condenser fan and ice dropping from plate
- Body material Stainless steel 304 grade
- Proper air ventilation ( four side grill ventilation)
- Automatic cleaning system
- Automatic defrost and condensate evaporation
- Fashionable design
- High cooling efficiency
- Low-energy consumption
- Heavy duty castors with brake & Lock & key
- Climate Classification T ( 42 Deg. C)
mLabs-IMS-30
BRAND – mLabs
Climate Type – T
Lock – Yes
Foot/Wheels – Casters
Voltage/Frequency – 220V/50HZ
Refrigerant (Gas) – R-134A
Related Products
Crime Scene Protection Kit
BRAND – mLabs
Crime scene protection barrier tape
Portable flashers
Chalk powder for marking
Scissors
Swiss knife (21 Functions)
Digital Magnifier
BRAND – mLabs
Build in light source
USB Power
Portability
Plug-n-Play/ Easy to install
Build in stand
Hand Magnifier
BRAND – mLabs
Available in : 2″, 3″, 4″
Suitable for reading, Stamp and coin collection, product examination etc
Gun Shot Analysis Kit
BRAND – mLabs
Gunpowder Particle Detection Kit provides all of the chemical reagents and supplies required to perform a very sensitive test to detect and visualize the nitrites contained in these minute powder particles
Fingerprinting Rollers
BRAND – mLabs
Available in : 2”, 4”
mLabs-650 TNG
BRAND – mLabs
Gross Capacity | 650 |
Unit Size WxDxH | 740*830*2010 (MM) |
Temperature Range | -2~+10 |
Door | 1 Glass Doors |
Climate Type | T |
Temp. Control | 43°C ambient temp |
Shelves | 2 |
Dual Function | NA |
Lock | Yes |
Foot/Wheels | Stainless Steel Caster Wheels |
Voltage/Frequency | 220V/50HZ |
Refrigerant (Gas) | R-134A |
Sniffer
BRAND – mLabs
- Versatile, able to screen for both drugs and explosives
- Small and Portable. Does not require any set up time
- Able to screen any surface size
- Perfect for screening people
- Highly reliable
- Cost Effective
- Very easy to use
- No Calibration needed
mLabs-600 TNM
BRAND – mLabs
Gross Capacity | 600 Liters |
Unit Size WxDxH | 700x760x1980 (MM) |
Temperature Range | 0~10°C |
Door | 2 Stainless Steel Doors |
Climate Type | T |
Temp. Control | 43°C ambient temp |
Shelves | 2 |
Dual Function | NA |
Lock | Yes |
Foot/Wheels | Stainless Steel Caster Wheels |
Voltage/Frequency | 220V/50HZ |
Refrigerant (Gas) | R-134A |
Foot & Tire Print Casting Kit
BRAND – mLabs
Item Description | Specifications |
---|---|
Foot Print Frame | Aluminum 14” x 6” x 2” |
Dirt Hardener | 200 ml |
Flexible Mixing Bowl (dish) | Different Sizes 3 Nos |
Spatula | Steel |
Mixing Spoon | Steel |
Measurement Tape | Small |
Evidence Tag | Pre Printed (Pack of 50) |
Wire Gauge | 4” x10” (Pack of 20) |
Casting Material | 2.5 Kg Top Grade |
Aerosol Sparer | Plastic |
Water Can | 1 Ltr |
Silicon Spray | One Bottle |
Disposable Pipettes | Pack of 12 |
Spray to Mark Evidence Area | One Bottle |
Surface Brush | Normal |
Molding Clay | 50 gm |
Bullet Trajectory Kit
BRAND – mLabs
This Bullet Trajectory kit is designed to aid the investigating officers in determining the point of origin from where the weapon was fired.
Electrostatic Dust Print Lifting Kit
BRAND – mLabs
Contents of Kit : | |
---|---|
Electrostatic Dust Mark Lifting Device | |
Static Discharge Cable | |
Film Roll for Lifting Dust Mark 20” wide | |
Ground Plane, Steel 4”x6” | |
Ground Plane Insulated Sheet 5”x7” | |
Heavy Duty Rubber Gloves | |
Plastic Handle Scissor | |
Wooden Handle Roller | |
Set of Photography Rulers (wooden folding, Vinyl) | |
Set of Adhesive Rulers (L Shape Roll, Rigid Photo Evidence Scale) | |
Molded Case, Customized Carrying Case |
DigiMag Standalone
BRAND – mLabs
Image Sensor: 5 Megapixels |
LCD Panel: 3.5 Inches |
Zoom: 4x |
High Still Capture Resolution |
Video Capture |
Focus Range: Manual Focus from 10mm to 50mm |
Frame Rate: Maximum 30f/s under 600 Lux Brightness |
Magnification Ratio: Up to 500x |
Light Source: LED (Adjustable by Control Wheel) |
Battery: 3.7V 1050mAh Rechargeable lithium battery (recharged by adaptor or USB) |
Main Product Dimensions: 107x147x228mm (L x W x D) |
Product Weight: 763gm |